+86-523-82995586 / +86-150 5236 6306

Contact Us

Xinghua Kailong Stainless Steel Products Co.,Ltd

Dongbei Industrial Park, Dainan Town, Xinghua County, Taizhou City, Jiangsu Province, CN - 225721

Tel: +86-523-82995586

Fax: +86-523-82995486

Manager: Forest Zhang

Mobile/WhatsApp: +86-150 5236 6306

E-mail: forest.kailong@gmail.com

News

Home > News > Content

Wire Rope Slings

              Wire Rope Braided Sling: 1, the actual breaking strength of snap shall be at least 70% of the minimum breaking tensile force of the corresponding wire rope. Note: If the wire rope is metal core, the metal core should be interspersed at least three times, it can be regarded as the bearing part of the wire rope. 2, in a single sling, the minimum distance of the snap of each end of the wire rope shall not be less than 10 times times the nominal diameter of the steel cord.Wire Rope Slings

              Steel Wire Rope Sling: 1, the actual breaking strength of snap shall be at least 90% of the minimum breaking tensile force of the corresponding wire rope. 2. The sleeve length of the noose of the steel rope sling (the distance from the connector to the inner edge of the noose) shall not be less than 15 times times the nominal diameter of the wire rope without the sheath ring.

              Braided Wire Rope Sling with appearance 1, the insertion part of the rope core shall not be exposed, each unit should be close, can not have the phenomenon of loosening. 2, inserted editor rope strands cut head to be flat, no obvious distortion. 3. According to the requirement of the demand side, the end part of the rope strand wire shall be fitted with suitable covering, but shall be indicated in the contract.Wire Rope Slings

             The appearance of the steel rope sling is 1, the joint surface should be smooth, no crack, flying edge and Burr. 2, the end of the wire rope should exceed the aluminum joint 1-1.5 times times rope diameter.

              Steel Wire Rope Sling is generally used in hazardous working environment, so the detection of wire rope sling is very important, the daily need to carry out inspection and maintenance of the sling, can not be installed on the disregard, this is very easy to cause injuries.Wire Rope Slings

              The twist distance measurement for the micro-diameter steel wire rope sling can be wrapped in soft white paper on twisted wire rope sling. Use a pencil to underline the traces of the strands in the sling, and then using the scale to delimit the precision of the measuring tool for the twist distance measurement, the coarse specifications of the wire rope sling, directly in the wire rope sling on the marking mark to measure the length of the measurement section is 5 of the twist distance, taking its uniform value as the measurement results.Wire Rope Slings



Home | About Us | Products | News | Exhibition | Contact Us | Feedback | Mobile | XML

TEL: +86-523-82995586 / +86-150 5236 6306  E-mail: sales.kailong@gmail.com

Copyright © Xinghua Kailong Stainless Steel Products Co., Ltd. All rights reserved.