+86-523-82995586 / +86-150 5236 6306

Contact Us

Xinghua Kailong Stainless Steel Products Co.,Ltd

Dongbei Industrial Park, Dainan Town, Xinghua County, Taizhou City, Jiangsu Province, CN - 225721

Tel: +86-523-82995586

Fax: +86-523-82995486

Manager: Forest Zhang

Mobile/WhatsApp: +86-150 5236 6306

E-mail: forest.kailong@gmail.com

News

Home > News > Content

Gap And Structure Type Of Stainless Steel Link Chain

The stainless steel decorative chain consists of chain plate, chain pin, sleeve and other components. Other types of chain only the chain board according to different needs made a different change, some in the chain board on the scraper, some on the chain board bearing guide bearings, and some on the chain board with rollers, etc., these are in order to apply in different applications of the conversion.Stainless Steel Link Chain

With excellent permeability to the chain, lubrication rollers and sprocket is relatively easy, but lubrication chain shaft and sleeve is more difficult. Because the gap between shaft and sleeve is very small, and it belongs to the open environment condition completely. If the lubricant is not well penetrated, it can not penetrate the shaft and sleeve of the interior, can not lubricate the shaft and sleeve.Stainless Steel Link Chain

To have excellent adhesion chain in operation, due to the role of high-speed, lubricating oil will be from. At low speed, the lubricant will drip due to gravity. All this will not only pollute the environment and the product, but also cause a lot of waste. Therefore, lubricants need to have good adhesion, can be firmly adhered to the surface of friction, and not because of various effects off. One of the functions of lubricating oil with excellent lubrication performance is lubrication, but the chain in operation because of different role, the lubricating oil lubrication performance requirements are higher, especially those heavy load and impact conditions of the chain, on the extreme pressure anti-wear requirements are higher, so the general chain lubricants are very attention to this requirement.Stainless Steel Link Chain

The gap size of the chain depends on the type of chain ring, followed by the consistency of the lubricant or viscosity, at its predicted operating temperature, to achieve the best consistency or viscosity, at its predicted operating temperature, to achieve the best degree or viscosity. The clearance size should be sufficient to allow oil to enter, if there is no such lubricant film, solid abrasive or corrosive gas will enter its clearance. Obviously, when the chain must work in the presence of abrasive, chemical gas or moisture, the load will increase the burden on the lubricant, where the lubricant will have a double effect-lubrication and protection.Stainless Steel Link Chain


Home | About Us | Products | News | Exhibition | Contact Us | Feedback | Mobile | XML

TEL: +86-523-82995586 / +86-150 5236 6306  E-mail: sales.kailong@gmail.com

Copyright © Xinghua Kailong Stainless Steel Products Co., Ltd. All rights reserved.